Soltek SL-75KAV/KAV-X Vista
Soltek SL-75KAV/KAV-X Driver
Soltek company was founded not so long ago – in , in Hsi-Chih, We were lucky to catch SLKAV-X motherboard based on a new chipset from VIA Missing: 75KAV/. 2 USER NOTICE T Product Model: SLKAV/75KAV-X Manual Revision: V Release Soltek Computer Inc. is not responsible for printing or clerical errors. LAYOUT KAV MAINBOARD LAYOUT KAV-X CHIPSET DIAGRAM Chapter 2. This package contains the files for installing the Soltek SLKAV/KAV-X BIOS. If it has been installed, updating (overwrite-installing) may fix problems, add new.
|Supported systems:||Windows 10, Windows 8.1, Windows 7|
|Price:||Free* [*Free Registration Required]|
Soltek SL-75KAV/KAV-X Driver
Forcing a DIMM in or out of a socket improperly may damage the memory module or the socket.
Memory modules are installed by inserting them straight into the slot until they click Soltek SL-75KAV/KAV-X the right place. They only fit in one direction, so do not force them in by a wrong direction.
- SLKAV/75KAV-X USER MANUAL V PDF
- Soltek SLKAV-X motherboard review (VIA KTA)
The AGP Pro slot comes with a warning label over the pin bay. Do Soltek SL-75KAV/KAV-X remove this label and the safety tab underneath if you use an AGP card without a retention notch.
Without the labels, AGP Cards may be placed into the wrong place. If that s the case, this action will damage your card, slot, and mainboard. If Soltek SL-75KAV/KAV-X install two hard disks, you must configure the second drive Soltek SL-75KAV/KAV-X Slave mode by setting its jumper accordingly.
Please refer to your hard disk documentation for the jumper settings. Orient the red line on the IDE ribbon cable to Pin1.
Review: Soltek SLKAV - Mainboard -
Orient the red line on the floppy ribbon cable to Pin1. The marking is interpreted as bellow: Size of L2 Cache: Correct CPU external frequency is key to ensure reliability of your system. Soltek SL-75KAV/KAV-X CPU external frequency or overclocking might cause unstable performance, so we strongly recommend to leave SW1 at default setting or legal operation.
Normally, the multiplier or bus ratio is detected automatically by FID. Soltek SL-75KAV/KAV-X, if the processor does not support the function, then Bus Ratio can not be selected.
It means that bus ratio select function Soltek SL-75KAV/KAV-X enabled. So as Soltek SL-75KAV/KAV-X as your CPU supports bus ratio select function, then the bus ratio can be selected by users. Setting of multipler The following diagrams show the location for jumper blocks on the mainboard.
Always make sure the power is off before changing any jumpers. Otherwise, mainboard could be damaged.
Then, return to pin closed position default. Unplugging the power cord from power supply before clearing CMOS will be Soltek SL-75KAV/KAV-X safest bet for user. The default voltage 3. Using a higher voltage may boost Soltek SL-75KAV/KAV-X overclocking performance but this may result in the shortening of your computer components s life. It is strongly recommended that you leave the voltage setting default.
SLKAV SOLTEK Motherboards Mainboards Drivers Manuals BIOS
If your mainboard has Soltek SL-75KAV/KAV-X Monitor chipset on-board, you must use a specially designed fan with speed sensor to Soltek SL-75KAV/KAV-X advantage of this function. For fans with speed sensors, the rotation of the fan blades will send out 2 electric pulses, by which system Hardware Monitor will work out the fan rotation speed.
Always consult vendor for proper CPU cooling fan. You can install PC Alert utility. The connector powers up the system when a Soltek SL-75KAV/KAV-X packet or signal is received through the LAN card.
SL-75KAV/75KAV-X USER MANUAL V 1.2
This thermal cable is to monitor device which Soltek SL-75KAV/KAV-X generate a lot of heat, such as HDD, graphics card etc. Please connect one end of the thermal cable A to Soltek SL-75KAV/KAV-X RT2 header, and tape the other end of thermal cable B on to the device which you want to monitor.
After you finish the thermal cable installation, you will see the Soltek SL-75KAV/KAV-X temperature in BIOS setup or Hardware monitor utility. This module mounts to a small opening on system case.
Use the five pins and connect a ribbon cable from Soltek SL-75KAV/KAV-X module Soltek SL-75KAV/KAV-X the motherboard's IR connector according to the pin definitions. Pressing the switch for more than 4 seconds while in the ON mode will shut down the system. Only the system beeps from the mounted speakers can be heard before initializing any integrated audio.
This is a preferable method of rebooting in order to extend the life of the power supply. I decided to forgo overclocking for a Soltek SL-75KAV/KAV-X and did a fresh install Soltek SL-75KAV/KAV-X Windows, this went smoothly, I left the onboard sound enabled, so no PCI slots where used. Once I had windows up and running it was time for some benchmarks The Benchmarks Well here's a few of the regular benchmarks Here's Soltek SL-75KAV/KAV-X to start with.
With the default BIOS settings the memory benchmarks are rather weak to say the least but this is the norm with all Via KT chipsets until you start to tweak the settings, Soltek SL-75KAV/KAV-X Soltek included some features in the BIOS to enable much better performance.