Asrock G41M-PS Instant Boot Driver for PC
Asrock G41M-PS Instant Boot Driver
G41M-S3. LGA for Intel® Core™ 2 Extreme / Core™ 2 Quad / Core™ 2 Supports ASRock Instant Boot, Instant Flash, OC DNA 1 x PS/2 Keyboard Port. Asrock G41M-VS3 R VIA HD Audio Driver free download. USB ports) Rear Panel I/O - 1 x PS/2 Mouse Port - 1 x PS/2 Keyboard Port - 1 Feature - ASRock OC Tuner - Intelligent Energy Saver - Instant Boot - ASRock. Asrock G41M-VS2 Intel G41 Chipset LGA Motherboard SATAII Gb/s connectors; Supports ASRock Instant Boot, Instant Flash, OC DNA; Supports Smart BIOS, Rear Panel I/O, I/O Panel: 1 x PS/2 Mouse Port; 1 x PS/2 Keyboard Port.
|Supported systems:||Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10|
|Price:||Free* [*Free Registration Required]|
Asrock G41M-PS Instant Boot Driver
ASRock G41M-VS3 with Pentium 4s with 800MHz FSB, Ram DDR3 1333 Problem
Keep the screws for later use. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Fasten the card to the chassis with screws.
The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply.
ASRock G41M-VS3 R2.0 Motherboard
The default setting short pin1 and pin2 is EuP enabled. If you want to disable this power saving function, you may short pin2 and pin3.
Please short pin2, pin3 for FSB1 jumper. Otherwise, the CPU and memory module may not work properly on this motherboard. Please refer Asrock G41M-PS Instant Boot below jumper setting. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Please refer to the instruction of your IDE device vendor for the details.
Asrock g41m-vs3 - - motherboard - micro atx - lga socket – MARKIT
Please follow the instruction in our manual and chassis manual to install your system. Enter Advanced Settings, and then select Chipset Configuration. Please connect a CPU fan cable to this connector and match the black wire to the ground pin. Though this motherboard provides pin ATX power connector, it can still Asrock G41M-PS Instant Boot if you adopt a traditional pin ATX power supply.
Right Click Gozo - Home
Failing to do so will cause the failure to power up. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers.
Therefore, the drivers you install can work properly. Please refer to the warning on page 8 for the possible Asrock G41M-PS Instant Boot risk before you apply Untied Overclocking Technology. You may also restart by turning the system off and then back on. Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen.
Warranty & Support
Second] Use this item to specify the system time. DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module s inserted and assigns appropriate frequency automatically. The configuration options depend on the CPU and memory module you adopt on this motherboard. The default value is [Auto]. Intel R SpeedStep tm tech.
Asrock G41M-VS2 Intel G41 Chipset LGA Motherboard VillMan Computers
Processor can switch between multiple frequency and voltage points to enable power savings. If you install Windows?
VistaTM and want to enable this function, please set this item to [Enabled]. Please note that enabling this function may reduce CPU voltage and lead to system stability or compatibility issue with some power supplies.
Please set this item to [Disable] if above issue occurs. Overclock Mode Use this to select Overclock Mode. The default value of this feature is [Auto].
Would you like to save current setting user defaults? In this option, you are allowed to load and save three user defaults according to your own requirements.